- Strong durable construction with an H-beam backbone.
- Prevent roll back damage with lower posts positioned higher off the ground.
- Durable 7 Ga rolled steel moldboard.
- Carry strength to the whole pusher with fully-welded high and low posts that tie directly into the H beam.
- Abrasion-resistant wear shoes made of AR400 steel.
- Premium grade rubber compound cutting edge.
- Durable Tuff-Kote powder coat protects your pusher for years to come.
- Included high-visibility blade guides.
Loader Snow Pushers from ScoopDogg by Buyers offer a strong and reliable containment plow for contractors looking to clear large areas of hard-packed snow and ice. The pusher is built on a foundation of strength. The 12 Inch H-beam backbone dissipates blunt force and adds additional strength where it is needed most. The H-beam can’t carry the load alone which is why upper and lower posts tie directly into the H-beam. Lower posts are positioned higher off the ground to help prevent damage in case of a roll back. The 5 Inch channel is braced directly to the upper posts and H-beam structure to take the oncoming force.
These pushers are crafted with pride and built using high quality materials. This model features a 7 Ga moldboard and 3/8 Inch thick side-containment plates. The upper and lower post are fully seam welded for the most durable construction.
Buyers Products Tuff Kote powder coating process extends the life of your pusher. First it’s sandblasted to remove all impurities and contaminants. Next it’s primed to seal and fill any inconsistencies in the material. A top coat then acts as an additional primer and prepares the surface for the final treatment — a super durable polyester powder coat to protect your plow from the elements for years to come.
ScoopDogg by Buyers snow pushers come ready to work with AR400 extremely abrasion resistant wear surfaces on the wear shoes. The shoes are attached with Grade 5 Hex Head Cap Screws (HHCS). The 1-1/2 by 10 Inch rubber compound cutting edge gives you durability and ground contact you need to get the job done right.
| Cutting Edge Material | High-Tensile-Strength Rubber |
| Finish | Powder-Coat with Primer |
| Minimum Required Horsepower | 120 HP |
| Minimum Required Machine Weight | 16000 Lbs |
| Moldboard Material | Carbon Steel |
| Shoe Material | AR400 Steel |
| Trip Protection | None |
| Width | 14 Feet |
| Height (Bottom Of Shoe To Top Of Side Plate) | 47 inches |
| Depth (Front Of Shoe To Back Of Pusher) | 63 Inches |
| Moldboard Gauge | 7 Gauge |
| Side Plate Thickness | 0.375 Inches |
| Side Plate Support Dimensions | 4 x 4 x 0.375 Inches |
| Included Reflective Decals | Yes |
| Upper Post Dimensions | 3 x 4 x 0.188 Inches |
| Lower Post Dimensions | 4 x 4 x 0.188 Inches |
| Friction Surface Thickness | 1 Inch |
| Cutting Edge Dimensions | 1-1/2 x 10 Inches |
| For Use With (Equipment Type) | Loader |
| Friction Surface Width | 6 Inches |
| Min Order Qty | 1 |
| Multiple Sale Qty | 1 |
| Product Code | 914 |
| Sell Pack Type | Each |
| Shipping Weight | 2401 Lbs |
| UPC | 724920092586 |
Product Common Use: Parking Lots / Hard-Packed Snow and Ice
