FORMER PART NUMBER: 1406969SSH
- Designed for dump bodies and flatbeds with a minimum 26 000-Lb GVW (gross vehicle weight).
- Available with 108-Inch 120-Inch 144-Inch or 168-Inch hoppers with a capacity from 6 to 16 cubic yards.
- Hydraulic power with two independent motors for conveyor and spinner operation. Your choice of three gearbox ratios.
- Spreads bulk salt bulk sand and 50/50 salt/sand mix.
- Hydraulic spreader controls sold separately with variety of options available.
- 18-Inch poly spinner broadcasts up to 30 Feet using with a height adjustable chute.
- Versatile 24-Inch wide chain conveyor drive.
- Stainless steel adjustable inverted V reduces stress on the drive line and improves flow.
- High quality 304 stainless steel construction for optimum corrosion resistance.
- Heavy duty 3/8-Inch hinged top screens with 2-1/2-Inch openings.
- Spreader is shown with optional light bar (8891167) and pre-wet system (LS4) which are sold separately.
- Made in the USA.
Buyers Products SaltDogg 6-16 Cubic Yard Hydraulic Conveyor Chain Spreader gives municipalities and large contractors a high-volume heavy duty spreader ready for use with a truck’s existing central hydraulic system. The 108-Inch 120-Inch 144-Inch or 168-Inch hoppers are designed for 96-Inch wide dump bodies and flatbeds with a minimum 26 000-Lb GVW (gross vehicle weight) chassis.
The hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. Six heavy duty hinged-top screens with 2-1/2-Inch openings help break up clumps of material during bulk loading.
A high-flow 24-1/2-Inch wide steel pintle chain conveyor provides a high speed material flow. The stainless steel inverted V reduces stress on the drive line to reduce wear and improve flow. A screw jack adjustable feed gate offers additional material flow control.
The conveyor is driven by a hydraulic motor with your choice of a 25:1 or 50:1 worm gear box or a 6:1 spur gear box. The heavy duty driveline is built with a 2-Inch drive shaft and a 1-1/2-Inch spring loaded idler shaft with bearings and 8-tooth sprockets.
The spreader is equipped with a 20-Inch poly spinner or an optional stainless steel spinner. It can spread material 2 to 40 Feet. The baffles and spinner chute height are adjustable to suit your application. The chute and spinner assembly flips up or detaches completely for convenient bulk unloading easy servicing and access to towing.
Hydraulic spreader controls are sold separately. A variety of options are available including manual hydraulic manual with load sensing and electric over hydraulic available with or without GPS. See Related Products below.
Spreader is shown with optional light bar (8891167) and pre-wet system (LS4) sold separately.
| Chute Primary Material | 304 Stainless Steel |
| Chute (Standard/Adjustable/Extended) | Adjustable Height |
| Controller Type | Not Included |
| Drive Type | Hydraulic |
| Hopper Length | 120 Inches |
| Hopper Material | 304 Stainless Steel |
| Number Of Motors | 2 |
| Spinner Material | Polyurethane |
| Works With Bagged #1 Rock Salt | Yes |
| Works With Bulk Salt | Yes |
| Works With Bulk Sand | Yes |
| Works With Salt / Sand Mix | Yes |
| Capacity | 9.70 Cubic Yards |
| Overall Height | 69 Inches |
| Overall Length | 144 Inches |
| Overall Width (At Top) | 82 Inches |
| Hopper Width | 82 Inches |
| Top Screen | Yes |
| Vibrator Included? | No |
| Spinner Diameter | 20 Inches |
| Spreading Width Range | 2 To 40 Feet |
| Gearbox Ratio | 6:1 |
| Feed Mechanism | Conveyor Chain |
| Feed Mechanism2 | 24-Inch Pintle Chain with 3/8-Inch Bars |
| Min Order Qty | 1 |
| Multiple Sale Qty | 1 |
| Product Code | 903 |
| Sell Pack Type | Each |
| Shipping Weight | 3086 Lbs |
| UPC | 724920185660 |
Product Common Use: Snow and Ice Control / Road and Highway Maintenance
